How to Use a Full Leaf Signature Leaf Infuser for Perfect Tea

Quick Answer

To use the Full Leaf Signature Leaf Infuser, open the silicone groove, add your loose leaf tea, close it securely, steep in hot water, then remove and rest on the silicone base for easy re-steeping.

Step-by-Step Guide to Using Your Full Leaf Signature Leaf Infuser

1. Open the Infuser: Hold the silicone leaf and gently pull apart the two halves along the groove. The silicone is flexible, so it opens easily. Avoid yanking too hard, as that could stretch the silicone over time. Check that the groove is fully separated before adding tea.
2. Add Your Loose Leaf Tea: Spoon your desired amount of loose leaf tea into the mesh basket. For most teas, one teaspoon per 8 ounces of water is a good starting point. Do not overfill; the leaves need room to expand and release flavor. Start with less tea if you are unsure—you can always add more next time.
3. Close and Secure the Infuser: Press the two halves together until the silicone groove snaps over the stainless steel base. Make sure the edges are aligned to prevent tea leaves from escaping. If the infuser does not close snugly, reposition and try again. Give the infuser a gentle shake to confirm it is sealed before steeping.
4. Steep Your Tea: Place the infuser in your cup or teapot and pour hot water over it. Steep according to your tea's recommended time (usually 2-5 minutes for most loose leaf teas). Avoid over-steeping, as it can make the tea bitter. Set a timer to avoid over-steeping and achieve the best flavor.
5. Remove and Rest on the Base: Lift the infuser out of the cup using the handle or the silicone leaf. Set it on the silicone base to catch any drips. This allows you to enjoy your tea without the infuser sitting in the cup and over-steeping. Use the base to keep your counter clean and ready for a second steeping.
6. Re-Steep or Clean: For a second steeping, simply add more hot water and repeat the steeping process. When you are done, rinse the infuser under warm water and allow it to air dry. Avoid using abrasive scrubbers that could damage the silicone or mesh. Clean promptly after use to prevent tea stains and residue buildup.

Product Facts

• Full Leaf Signature Leaf Infuser - Mint: The Full Leaf Signature Leaf Infuser features a silicone groove that holds the stainless steel base, making it easy to open and close. You can quickly load and secure your tea leaves without fumbling, so you can start steeping right away.